Materials Handling Power UNIT two
This power unit functions power up gravity down circuit. Activate the commence solenoid to start the motor to lift the machine. The lowing movement is activated through the solenoid valve with all the reducing pace managed through the pressure compensated movement control valve. Products of this series can be widely used in the sector of logistic devices such as fork lift, mini lift table, etc.
1. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean the many hydraulic parts concerned before mounting the electrical power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which really should also be clean and absolutely free of impurities, N46 hydraulic oil is proposed .
four. Oil modifying is needed after the preliminary one hundred operation hrs,afterwards after just about every 3000 hrs.
5. The energy unit ought to be mounted horizontally.
Materials Dealing with Electrical power UNIT 1
This electrical power unit is built for the fork lift sector, consisting of really effective gear pump, DC motor, manual increase and reduce valve, tank, ect. The up and down movement are managed from the lever with the guide release valve, which can be equipped with an electrical switch to activate the motor. The lowing velocity is managed by the strain compensated flow management valve.
1. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean the many hydraulic elements concerned before installation of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which ought to also be clean and no cost of impurities, N46 hydraulic oil is suggested .
4. Oil modifying is required just after the initial 100 operation hours, afterwards once every single 3000 hrs.
five. The energy unit proven is intended to be mounted horizontally.