Diaphragm coupling
Drum gear coupling
Plum-shaped elastic coupling
Star coupling
Elastic pin coupling
Elastic pin gear coupling
Elastic sleeve pin coupling
JQ type clamp coupling
Sprocket coupling
Slider coupling
Tyre coupling
Rigid coupling
Serpentine spring coupling
Three-jaw coupling for pump
Coupling accessories
Coupling rough
LK elastic block coupling
Polyurethane plum-shaped elastomer
Characteristics of polyurethane plum-shaped elastomer:
1. The pin of the elastic sleeve pin coupling is covered with a rubber ring, which has elasticity and the ability to compensate the axis displacement, but when the relative angular displacement is large, it is easy to wear;
2. Simple structure, convenient installation, easy replacement, small size, light weight, large transmission torque, widely used in various rotary pumps;
3、许用相对径向位移0.14-0.2mm;许用相对角位移0度40分;
4. The additional radial load caused by the relative displacement of the two shaft axes is (0.1-0.3)P;
5. The standard of the water pump industry is Bll01, its maximum allowable torque is 8316N•m, and the large shaft diameter is 200mm.
Polyurethane plum-shaped elastomer product use:
It is suitable for the connection of large equipment and various mechanical buffers acting on the transmission shaft.
Torque: 22.4—2500NM
Wear: <0.05cm3 / 1.61km
Product hardness: 9 ±5
Standard: GB5272-85
Specification: MT1—MT14
Elastic parts: a is polyester polyurethane (UR) orange b is cast nylon (PA) red
Model specification parameters of polyurethane plum-shaped elastomer:
model | specification | |||
Outer diameter (D) | Inner hole diameter (D) | Thickness (n) | Number of petals | |
MT1 | 48 | 19 | 12 | 4 |
MT2 | 58 | 16 | ||
MT3 | 68 | 28 | 18 | 6 |
MT4 | 82 | 34 | ||
MT5 | 100 | 42 | 20 | |
MT6 | 122 | 52 | 25 | |
MT7 | 140 | 65 | 30 | |
MT8 | 166 | 90 | 8 | |
MT9 | 196 | 100 | 35 | |
MT10 | 225 | 115 | 10 | |
MT11 | 255 | 140 | 45 | |
MT12 | 295 | 170 | 50 | |
MT13 | 356 | 215 | 55 | |
Hangzhou polyurethane plum-shaped elastomer Hangzhou polyurethane plum-shaped elastomer