Diaphragm coupling
Drum gear coupling
Plum-shaped elastic coupling
Star coupling
Elastic pin coupling
Elastic pin gear coupling
Elastic sleeve pin coupling
JQ type clamp coupling
Sprocket coupling
Slider coupling
Tyre coupling
Rigid coupling
Serpentine spring coupling
Three-jaw coupling for pump
Coupling accessories
Coupling rough
LK elastic block coupling
Reamed hole bolt
Ordinary bolts can bear lateral and axial loads, but the lateral load bearing method is mainly based on the friction caused by the pre-tightening moment, while the reamed bolts can also bear lateral and axial loads. The lateral load bearing method is The shear strength of the bolt itself, its transverse bearing capacity is much higher than that of ordinary bolts, and the axial bearing capacity is the same as that of ordinary bolts.
Ordinary bolt
The diameter of the screw part of an ordinary bolt and the basic size of the hole are generally different, (generally the hole size is 0.5 to 1 mm larger than the bolt size), so it cannot be called a fit.It relies on the pre-tightening force of the bolt to prevent relative sliding and movement of the connected parts.When there is relative sliding between the connected parts, the pre-tightening force is converted into frictional force to prevent its movement, so a larger pre-tightening force is required.
Reamed hole bolt
Reamed hole bolt connection, the diameter of the screw part is the same as the basic size between the hole, it is a transition fit (not a clearance fit).When there is relative sliding between the connected parts, relying on the shearing effect of the bolt itself to prevent its movement, so only a small pre-tightening force is required.
German: die Passschraube close-fit bolts, reamed bolts
die Schraube bolt
Application example of reamed hole bolts: For structures that use friction to transmit force under vibration load conditions, reamed hole bolts should be used (to transmit force by the shape of the part).