Hangzhou diaphragm coupling
Hangzhou drum gear coupling
Hangzhou plum blossom-shaped elastic coupling
Hangzhou star coupling
Hangzhou elastic pin coupling
Hangzhou elastic pin gear coupling
Hangzhou elastic sleeve pin coupling
Hangzhou JQ type clamp shell coupling
Hangzhou sprocket coupling
Hangzhou Slider Coupling
Hangzhou tire coupling
Hangzhou rigid coupling
Hangzhou serpentine spring coupling
Three-jaw coupling for Hangzhou pump
Hangzhou Coupling Accessories
Hangzhou Coupling Rough
Hangzhou LK elastic block coupling
Hangzhou SL cross slider coupling
The SL cross slider coupling consists of two half couplings with grooves on the end faces and an intermediate disc with protruding teeth on both sides.Because the convex teeth can slide in the groove, the relative displacement between the two shafts during installation and operation can be compensated.
The material of the coupling parts can be 45 steel, and the working surface needs to be heat treated to increase its hardness; Q275 steel can also be used when the requirements are lower, without heat treatment.In order to reduce friction and wear, oil should be injected from the oil hole of the middle plate for lubrication during use.Because the half-coupling and the intermediate disc form a moving pair and cannot rotate relative to each other, the angular velocity of the driving shaft and the driven shaft should be equal.However, when working with relative displacement between the two shafts, the middle disk will generate a large centrifugal force, which will increase the dynamic load and wear.Therefore, when selecting, pay attention that its working speed should not be greater than the specified value.This kind of coupling is generally used for speed n<250r/min, the rigidity of the shaft is relatively large, and there is no severe impact.
The material of the SL cross slider coupling parts can be 45 steel, and the working surface needs to be heat treated to increase its hardness; Q275 steel can also be used when the requirements are low, without heat treatment.In order to reduce friction and wear, oil should be injected from the oil hole of the middle plate for lubrication.The Oldham slider coupling is also known as the metal slider coupling. Its slider is in the shape of a circular ring and is made of steel or alloy. It is suitable for transmissions with low speed and large transmission torque.
Basic parameters
Basic parameters and main dimensions of SL cross slider coupling
specification | Nominal torque Tn(N·M) | Permissible speed [n]r/min | Diameter of shaft hole d | D | D | L | H | S | Moment of inertia (kg.m 2) | weight (kg) |
SL70 | 120 | 250 | 15 ~ 18 | 70 | 32 | 42 | 14 | 0.5 | 0.002 | 1.5 |
SL90 | 250 | 250 | 20 ~ 30 | 90 | 45 | 52 | 14 | 0.008 | 2.6 | |
SL100 | 500 | 250 | 36 ~ 40 | 100 | 60 | 70 | 19 | 0.026 | 5.5 | |
SL130 | 800 | 250 | 45 ~ 50 | 130 | 80 | 90 | 19 | 0.07 | 10 | |
SL150 | 1250 | 250 | 55 ~ 60 | 150 | 95 | 112 | 19 | 0.14 | 15.5 | |
SL170 | 2000 | 250 | 65 ~ 70 | 170 | 105 | 125 | 24 | 0.25 | 22.4 | |
SL190 | 3200 | 250 | 75 ~ 80 | 190 | 110 | 140 | 29 | 0.5 | 31.5 | |
SL210 | 5000 | 250 | 85 ~ 90 | 210 | 130 | 160 | 33 | 1.0 | 0.9 | 45 |
SL240 | 8000 | 250 | 95 ~ 100 | 240 | 140 | 180 | 33 | 1.6 | 59.5 | |
SL260 | 9000 | 250 | 100 ~ 110 | 260 | 160 | 190 | 33 | 2 | 76 | |
SL280 | 10000 | 100 | 110 ~ 120 | 280 | 170 | 200 | 33 | 3 | 94.3 | |
SL300 | 13000 | 100 | 120 ~ 130 | 300 | 180 | 210 | 43 | 4.3 | 111 | |
SL320 | 16000 | 100 | 130 ~ 140 | 320 | 190 | 220 | 43 | 5.7 | 129 | |
SL340 | 20000 | 100 | 150 | 340 | 210 | 250 | 48 | 8.4 | 162 | |
SL360 | 32500 | 100 | 160 | 360 | 240 | 280 | 48 | 19.2 | 258 | |
SL400 | 38700 | 80 | 170 | 400 | 260 | 300 | 48 | 26.1 | 305 | |
SL460 | 63000 | 70 | 200 | 460 | 300 | 350 | 58 | 62.9 | 560 |
Hangzhou SL cross slider coupling Hangzhou SL cross slider coupling