Hangzhou diaphragm coupling
Hangzhou drum gear coupling
Hangzhou plum blossom-shaped elastic coupling
Hangzhou star coupling
Hangzhou elastic pin coupling
Hangzhou elastic pin gear coupling
Hangzhou elastic sleeve pin coupling
Hangzhou JQ type clamp shell coupling
Hangzhou sprocket coupling
Hangzhou Slider Coupling
Hangzhou tire coupling
Hangzhou rigid coupling
Hangzhou serpentine spring coupling
Three-jaw coupling for Hangzhou pump
Hangzhou Coupling Accessories
Hangzhou Coupling Rough
Hangzhou LK elastic block coupling
Three-jaw coupling for Hangzhou pump
The three-jaw coupling for pumps uses several pins made of non-metallic materials, which are placed in the mating holes between the two halves of the coupling and the inner surface of the outer ring, and the two halves of the coupling are realized by transmitting torque through the pins. A device connected to the device.
Product parameters of three-jaw coupling for pump:
1、许用相对径向位移(0.01d+0.25)mm,d为轴直径(mm);许用相对角位移0度40分;联轴器的附加径向力为(0.1~0.3)P;
2. The standard code of the water pump industry is Bl104, the maximum allowable torque is 850N·m, and the large shaft diameter is 50mm;
3. The middle sliding block of the claw coupling is made of bakelite or nylon with cloth.
4. Small size, light weight, simple structure, easy installation, low cost, often used in small power occasions;
5. Small inertia force, suitable for two-axis connection with low torque, high speed, and no sharp impact.The transmission torque of nylon slider is small, but it is suitable for high-speed operation without lubrication;
Product features of three-jaw coupling for pump:
1. Small size, light weight, simple structure, easy installation, low cost, often used in small power occasions;
2. Small inertia force, suitable for two-axis connection with low torque, high speed, and no sharp impact. The nylon slider transmits a small torque, but it is suitable for high-speed operation and does not require lubrication;
3. The transmission torque is large. At the same torque, the rotation diameter is mostly smaller than the gear coupling, which can partially replace the gear coupling.
The three-jaw coupling for pumps uses several pins made of non-metallic materials, which are placed in the mating holes between the two halves of the coupling and the inner surface of the outer ring, and the two halves of the coupling are realized by transmitting torque through the pins. The coupling has the following characteristics:
(1) The transmission torque is large. At the same torque, the rotation diameter is mostly smaller than that of the gear coupling, and the volume is lighter. It can partially replace the gear coupling.
(2) Compared with gear couplings, it has simple structure, fewer components, and is more convenient to manufacture. It does not require gear processing machine tools.
Three-jaw coupling for Hangzhou pump Three-jaw coupling for Hangzhou pump