1.A connecting website link of an O-ring Chain for common application is pre-coated with grease with the pins. Ahead of connection, verify the grease to the surfaces of pins, and should the level 
of grease is modest, apply grease with bare hands. (If gloves are employed, the grease will likely be absorbed through the gloves.)
Example: When the connecting website link (I) of an O-ring chain for common application is
shipped, O-rings are fitted with the roots from the pins. If your O-rings come loose as a consequence of vibration through transport, refit the O-rings in on the roots on the pins.
In this instance, you’ll want to return the grease collected at the roots of your pins to the central surfaces from the pins, much more at portion A than at portions B shown from the over illustration. (Portions A is worn because of sliding with the bushings.)
2.The chain is often most very easily connected around the teeth of the sprocket. Engage the links at each ends on the chain using the sprocket teeth and match connecting pins. Should the sprocket is usually moved, the chain may also be linked to the loosened side.
three. Connecting method
1.Verify that O-rings are connected to your roots of your pins.
two.If your quantity of grease utilized within the connecting pins is small, coat the pins with grease at the central portions.
three.Insert the connecting pins into the bushings of the inner back links at both ends.
4.Verify the grease is utilized for the total face on the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and even though pressing the connecting plate, set up the spring clip. Confirm irrespective of whether the head (the finish with no split) from the spring clip is turned in the feeding route of your chain. (See the following illustration.)
six.Make sure you verify the spring clip is securely fitted in the clip grooves in the connecting pins.
This completes jointing in the connecting website link. Note that grease over the surfaces of connecting pins and O-rings is often removed for the duration of set up perform. In this instance, re-grease employing the grease within the surface of the base chain or the grease within the polyethylene bag in which the connecting link was contained.
