Downsizing Your Program with Higher Power Chains
HK sort roller chains conform to H kind of ANSI, and their thickness of inner and outer hyperlink plates are equal to people of the subsequent bigger size chain. Hence, HK style roller chains are greater in tensile strength by about 20%and in maximum allowable load by about 15% than those of common roller chains. Because the bodyweight of the chains is also larger, HK type roller chains are suitable for that application of hefty duty at low pace.
Proposed employs
?Optimal for places where increased strength is needed but massive and heavier chains can not be used.
Variety of chains
Choose a proper HK style roller chain according to “Low-speed selection”
For your maximum allowable load, see the following table of dimensions.
HK style roller chains can be found up to triplex.
Sprockets
Use common sprockets for any simplex HK roller chain Since the transverse pitches are greater than these of typical chains in the case of duplex or triplex, standard sprockets cannot be made use of. Refer towards the sprocket tooth profiles for HK
Connecting link and offset website link
The tensile strength of connecting backlinks and offset backlinks are listed about the left, however the maximum allowable load is lower than that on the base chain. Please check with us really should you’ve any issues. It really is encouraged to make use of the connecting hyperlink of interference-fitted (FJ, HJ)
Hardly ever make the holes of the connecting plate more substantial and in no way make the pins thinner to facilitate the perform for fitting the pins in to the connecting 
plate, because otherwise the fatigue strength will be lowered.
Variety of chains
Select a right HK kind roller chain dependant on “Low-speed selection”
For your optimum allowable load, see the following table of dimensions.
HK kind roller chains can be found up to triplex.
Sprockets
Use conventional sprockets to get a simplex HK roller chain Since the transverse pitches are larger than individuals of normal chains within the situation of duplex or triplex, typical sprockets can not be employed. Refer to the sprocket tooth profiles for HK
Connecting website link and offset hyperlink
The tensile power of connecting links and offset hyperlinks are listed on the left, but the maximum allowable load is lower than that on the base chain. Please seek advice from us must you’ve any inquiries. It truly is proposed to utilize the connecting website link of interference-fitted (FJ, HJ)
Hardly ever make the holes of your connecting plate larger and by no means make the pins thinner to facilitate the perform for fitting the pins to the connecting plate, considering the fact that otherwise the fatigue strength will probably be lowered.
