Any harm within the teeth surfaces of a sprocket diminishes the existence in the conveyor chain.
With conventional sprockets, significantly worn sprocket teeth have been repaired by teeth padding or the whole sprocket was replaced. In either situation, restore was expensive and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our clients for the dramatic savings in expense and time.
The teeth may be replaced by two techniques: person tooth substitute or sectional teeth substitute.
The bolts and nuts employed for mounting the teeth on to your sprocket are spot-welded to avoid loosening.
The respective structures are illustrated over the right.
The above photo as well as major right illustration display a sprocket for individual tooth substitute. Since the joint face involving the replaced teeth and the sprocket is formed in a exceptional arc, the bonding accuracy is higher along with the sprocket power is enhanced. In addition, because the load acting within the mounting bolts is decreased, there’s much less probability of loosening. This sprocket construction is patented.
You will find two sorts of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilised for massive sprockets getting hefty loads and welded sheet steel hubs for other applications.