Diaphragm coupling
Drum gear coupling
Plum-shaped elastic coupling
Star coupling
Elastic pin coupling
Elastic pin gear coupling
Elastic sleeve pin coupling
JQ type clamp coupling
Sprocket coupling
Slider coupling
Tyre coupling
Rigid coupling
Serpentine spring coupling
Three-jaw coupling for pump
Coupling accessories
Coupling rough
LK elastic block coupling
GL type roller chain coupling
The GL type roller chain coupling has a simple structure (composed of four pieces), convenient assembly and disassembly, no need to move the connected two shafts during disassembly, compact size, light weight, compensation capability, low requirements for installation accuracy, and work , Longer life, lower cost and other advantages.
The GL type roller chain coupling uses a common chain, which meshes with two parallel sprockets with the same number of teeth. The main difference between different structure types of chain couplings is that they use different chains. Common ones are double-row roller chain couplings. Shafts, single-row roller chain couplings, toothed chain couplings, nylon chain couplings, etc.The performance of double-row roller chain couplings is better than that of other structural types of couplings, and is widely used by many manufacturers, and our country has also formulated the corresponding standards.
It can be used in the shaft transmission of textile, agricultural machinery, lifting and transportation, engineering, mining, light industry, chemical industry and other machinery. It is suitable for high temperature, humidity and dusty working conditions. It is not suitable for high speed, severe impact load and transmission of axial force. In the case of low pressure, the roller chain coupling should work under the conditions of good lubrication and a protective cover.
The basic parameters and main dimensions of GL roller chain coupling (GB/T 6069-2002) (unit: mm)
model | Nominal torque Tn N·m | Permissible speed [n] r/min | Diameter of shaft hole | Diameter of shaft hole | Chain number | Pitch P | Number of teeth Z | D | S | 质量 Kg | Moment of inertia I /kg·m2 | ||
Y | J1 | ||||||||||||
Without cover | Install the cover | d1,d2 | L, L1 | ||||||||||
GL1 | 40 | 1400 | 4500 | 16-20 | 42-52 | 38 | 0.6B | 9.525 | 14 | 51.06 | 4.9 | 0.4 | 0.00010 |
GL2 | 63 | 1250 | 4500 | 19-24 | 42-52 | 38 | 0.6B | 9.525 | 16 | 57.08 | 4.9 | 0.7 | 0.00020 |
GL3 | 100 | 1000 | 4000 | 20-25 | 52-62 | 38-44 | 0.8B | 12.70 | 14 | 68.88 | 6.7 | 1.1 | 0.00038 |
GL4 | 160 | 1000 | 4000 | 24-32 | 52-82 | 44-60 | 0.8B | 12.70 | 16 | 76.91 | 6.7 | 1.8 | 0.00086 |
GL5 | 250 | 800 | 3150 | 28-40 | 62-112 | 60-84 | 10A | 15.875 | 16 | 94.46 | 9.2 | 3.2 | 0.0025 |
GL6 | 400 | 630 | 2500 | 32-50 | 82-112 | 60-84 | 10A | 15.875 | 20 | 116.57 | 9.2 | 5.0 | 0.0058 |
GL7 | 630 | 630 | 2500 | 40-60 | 112-142 | 84-107 | 12A | 19.05 | 18 | 127.78 | 10.9 | 7.4 | 0.012 |
GL8 | 1000 | 500 | 2240 | 45-70 | 112-142 | 84-107 | 16A | 25.40 | 16 | 154.33 | 14.3 | 11.1 | 0.025 |
GL9 | 1600 | 400 | 2000 | 50-80 | 112-172 | 84-132 | 16A | 25.40 | 20 | 186.50 | 143. | 20.0 | 0.061 |
GL10 | 2500 | 315 | 1600 | 60-90 | 142-172 | 107-132 | 20A | 31.75 | 18 | 213.02 | 17.8 | 26.1 | 0.079 |
GL11 | 4000 | 250 | 1500 | 75-100 | 142-212 | 107-167 | 24A | 38.10 | 16 | 231.49 | 21.5 | 39.2 | 0.188 |
GL12 | 6300 | 250 | 1250 | 85-120 | 172-212 | 132-167 | 28A | 44.45 | 16 | 270.08 | 24.9 | 59.4 | 0.380 |
GL13 | 10000 | 200 | 1120 | 100-140 | 212-252 | 167-202 | 32A | 50.80 | 18 | 340.80 | 28.6 | 86.5 | 0.869 |
GL14 | 16000 | 200 | 1000 | 120-160 | 212-302 | 167-242 | 32A | 50.80 | 22 | 405.22 | 28.6 | 150.8 | 2.06 |
GL15 | 25000 | 200 | 900 | 140-190 | 252-352 | 202-282 | 40A | 63.50 | 20 | 466.25 | 35.6 | 234.4 | 4.37 |
Hangzhou GL type roller chain coupling Hangzhou GL type roller chain coupling