Do you know how to install the diaphragm coupling?

　　Do you know how to install the diaphragm coupling?

　　Diaphragm couplings are now receiving more and more attention from customers. Compared with gear couplings, diaphragm couplings have the characteristics of good sealing, low noise, no lubrication, and easy maintenance. Then everyone knows that diaphragm couplings How to install the diaphragm? Let's follow the editor to find out:

　　1. Before installation, clean the end faces of the two shafts and check the fit of the key notches on the end faces. After installation, run a shift normally, check all screws, if found loose, tighten them, repeat several shifts so as not to loosen;

　　2. During work and operation, check whether the diaphragm coupling is abnormal. If any abnormality occurs, perform maintenance;

　　3. In order to prevent the fretting of the diaphragm during high-speed operation, causing microcracks and damage to the bolt holes of the diaphragm, solid lubricants such as molybdenum disulfide can be applied between the diaphragms or the surface of the diaphragm can be coated with anti-friction Layer processing;

　　4. Appropriate protective measures shall be taken at each site where personal and equipment accidents may be caused by the operating diaphragm coupling.The coupling diaphragm is composed of several groups of diaphragms that are alternately connected with the two halves of the coupling with bolts. Each group of diaphragms is composed of several pieces stacked together. The diaphragms are divided into connecting rod type and different shape of the whole piece type.